6.5 CM - QL herlaai hulp

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

6.5 CM - QL herlaai hulp

Post by Rem » Sat Aug 03, 2019 10:47 am

More manne, as julle my kan help met my lading sal ek dit baie waardeer. Volgende info:

Rilfe - Tikka T3x 6.5cm

Barrel length - 22inch/558.8mm

Case volume - 52,03grain

Powder - ADI 2209 (MEM7108)

Bullet -140 ELDm

Primer - CCI 450

Brass - Lapua SR

COL - 73.85mm (.015" jump)

Charge: 40.00grain
- 2514, 2540, 2499, 2518 - 2518avg

Hoop julle het die file vir ADI 2209.

Dankie vir die hulp

Mag die interskole vandag blou se kant toe val.









Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

tripodmvr
Hero Member
Hero Member
Posts: 16462
Joined: Fri Mar 11, 2011 8:31 pm
Location: Vereeniging

Re: 6.5 CM - QL herlaai hulp

Post by tripodmvr » Sat Aug 03, 2019 6:21 pm

Probeer 42.0/1 vir spoed van 2650vps. Druk bereken as 53K psi.
.22 Krico, Howa 223 Varminter, 243 AI Musgrave RSA, Ruger RPR 243, P14 - 7 x 64, BSA 303 Sporter, 375 H&H Musgrave, 30-06 Ruger No. 1A, Khan O/U 12br, Norinco O/U 12br

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Sat Aug 03, 2019 11:05 pm

Dankie!

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Sat Aug 03, 2019 11:23 pm

tripodmvr wrote:Probeer 42.0/1 vir spoed van 2650vps. Druk bereken as 53K psi.
Waar sal my maks druk le asb?

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

tripodmvr
Hero Member
Hero Member
Posts: 16462
Joined: Fri Mar 11, 2011 8:31 pm
Location: Vereeniging

Re: 6.5 CM - QL herlaai hulp

Post by tripodmvr » Sun Aug 04, 2019 7:23 am

Creedmoor = 60K psi volgens QL se waardes.

In praktiese terme, moet nie 2750vps oorskry nie.
.22 Krico, Howa 223 Varminter, 243 AI Musgrave RSA, Ruger RPR 243, P14 - 7 x 64, BSA 303 Sporter, 375 H&H Musgrave, 30-06 Ruger No. 1A, Khan O/U 12br, Norinco O/U 12br

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Sun Aug 04, 2019 8:46 am

tripodmvr wrote:Creedmoor = 60K psi volgens QL se waardes.

In praktiese terme, moet nie 2750vps oorskry nie.
Perfek. Dankie

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Sun Aug 11, 2019 11:17 am

Rem wrote:
tripodmvr wrote:Creedmoor = 60K psi volgens QL se waardes.

In praktiese terme, moet nie 2750vps oorskry nie.
Perfek. Dankie

Sent from my SM-G960F using Tapatalk
Oom Tripod
Ek neem aan my node le by 2650? Is daar n hoër node by 2700? 2700 lyk ook baie belowend. Dankie!

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

tripodmvr
Hero Member
Hero Member
Posts: 16462
Joined: Fri Mar 11, 2011 8:31 pm
Location: Vereeniging

Re: 6.5 CM - QL herlaai hulp

Post by tripodmvr » Sun Aug 11, 2019 12:51 pm

Die brandspoed het 'n effek op die node. Gee my jou resultate dan kan ek dit weer bereken - spoed en lading.
.22 Krico, Howa 223 Varminter, 243 AI Musgrave RSA, Ruger RPR 243, P14 - 7 x 64, BSA 303 Sporter, 375 H&H Musgrave, 30-06 Ruger No. 1A, Khan O/U 12br, Norinco O/U 12br

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Sun Aug 11, 2019 9:56 pm

tripodmvr wrote:Die brandspoed het 'n effek op die node. Gee my jou resultate dan kan ek dit weer bereken - spoed en lading.
42.00  - 2623, 2637 (SD 9.8, avg 2630)

42.30 - 2658, 2664, 2654 (SD 5, avg 2658)

42.50 - 2666, 2662, 2664 (SD 2, avg 2664)

42.80 - 2689, 2674, 2689 (SD 8.6, avg 2684)

Dankie!



Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Mon Aug 12, 2019 12:35 am

Ek het so "ladder" toets ook gedoen waar ek in 0.1grain inkremente gelaai het. Sommer addtionele info:

42.30 - 2637
42.40 - 2672
42.50 - 2662
42.60 - 2672
42.70 - 2679
42.80 - no read
42.90 - 2695
43.00 - 2695
43.10 - 2702
43.20 - 2696
43.30 - 2721
43.40 - 2721
43.50 - 2715
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Tue Aug 13, 2019 12:06 pm

tripodmvr wrote:Die brandspoed het 'n effek op die node. Gee my jou resultate dan kan ek dit weer bereken - spoed en lading.
As Oom kan uithelp met die ladings gebasseer op daai laaste info sal ek dit waardeer, dankie!

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

tripodmvr
Hero Member
Hero Member
Posts: 16462
Joined: Fri Mar 11, 2011 8:31 pm
Location: Vereeniging

Re: 6.5 CM - QL herlaai hulp

Post by tripodmvr » Tue Aug 13, 2019 12:36 pm

Ek het altwee die resultate gebruik en 42,3/4 bereken nou as in en om die node. Spoed bly by 2650vps.

Daar is wel nodes wat so halfpad tussen die' wat ons gewoonlik gebruik is. Hulle is egter nou en dit kan verklaar hoekom jy naby 2700vps ook akkuraatheid verkry. Geringe ladingsveranderings en temperatuur wisselings kan jou dan van hulle laat afbeweeg. Druk begin ook vanaf 4.3gr baie naby aan maks word.
.22 Krico, Howa 223 Varminter, 243 AI Musgrave RSA, Ruger RPR 243, P14 - 7 x 64, BSA 303 Sporter, 375 H&H Musgrave, 30-06 Ruger No. 1A, Khan O/U 12br, Norinco O/U 12br

User avatar
swc-tr
Hero Member
Hero Member
Posts: 1148
Joined: Thu Dec 09, 2010 2:01 pm
Location: Middelburg, Mp

Re: 6.5 CM - QL herlaai hulp

Post by swc-tr » Tue Aug 13, 2019 12:56 pm

Rem, waar het jy die ADI 2209 kruit gekry?
Dis 6" agter die kolf wat tel!
"A fool with a tool, is still a fool."

User avatar
ruaanb
Hero Member
Hero Member
Posts: 4354
Joined: Thu Aug 14, 2014 10:29 am
Location: Durbanville, WesKaap

Re: 6.5 CM - QL herlaai hulp

Post by ruaanb » Tue Aug 13, 2019 2:36 pm

Rem bly nou in NZ as ek dit nie mis het nie.

User avatar
swc-tr
Hero Member
Hero Member
Posts: 1148
Joined: Thu Dec 09, 2010 2:01 pm
Location: Middelburg, Mp

Re: 6.5 CM - QL herlaai hulp

Post by swc-tr » Tue Aug 13, 2019 2:53 pm

Dankie
Dis 6" agter die kolf wat tel!
"A fool with a tool, is still a fool."

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Tue Aug 13, 2019 9:49 pm

tripodmvr wrote:Ek het altwee die resultate gebruik en 42,3/4 bereken nou as in en om die node. Spoed bly by 2650vps.

Daar is wel nodes wat so halfpad tussen die' wat ons gewoonlik gebruik is. Hulle is egter nou en dit kan verklaar hoekom jy naby 2700vps ook akkuraatheid verkry. Geringe ladingsveranderings en temperatuur wisselings kan jou dan van hulle laat afbeweeg. Druk begin ook vanaf 4.3gr baie naby aan maks word.
Baie dankie! Ja klink asof ek by 2650 moet vasmaak.

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Tue Aug 13, 2019 9:49 pm

ruaanb wrote:Rem bly nou in NZ as ek dit nie mis het nie.
Yes, ek sal my informasie updatteer. Jammer manne

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

tripodmvr
Hero Member
Hero Member
Posts: 16462
Joined: Fri Mar 11, 2011 8:31 pm
Location: Vereeniging

Re: 6.5 CM - QL herlaai hulp

Post by tripodmvr » Wed Aug 14, 2019 10:41 am

Rem, kyk na ander dryfmiddels ook. Norma, VV ens.
.22 Krico, Howa 223 Varminter, 243 AI Musgrave RSA, Ruger RPR 243, P14 - 7 x 64, BSA 303 Sporter, 375 H&H Musgrave, 30-06 Ruger No. 1A, Khan O/U 12br, Norinco O/U 12br

tripodmvr
Hero Member
Hero Member
Posts: 16462
Joined: Fri Mar 11, 2011 8:31 pm
Location: Vereeniging

Re: 6.5 CM - QL herlaai hulp

Post by tripodmvr » Wed Aug 14, 2019 10:45 am

Ek sien Norma MRP kan dalk die wenner wees. Druk 53K psi met 2740vps as node.
.22 Krico, Howa 223 Varminter, 243 AI Musgrave RSA, Ruger RPR 243, P14 - 7 x 64, BSA 303 Sporter, 375 H&H Musgrave, 30-06 Ruger No. 1A, Khan O/U 12br, Norinco O/U 12br

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Wed Aug 14, 2019 10:59 am

N550? Wat van alliant se RL17 of RL16. Hulle is blykbaar baie vinnig.

Hierdie AR2209 is goedkoop en redelik konstant so sal vir nou eers aangaan met hom (het 4kg gekoop) haha.

Maar ja die Alliant poeier is blykbaar vinnigste

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

tripodmvr
Hero Member
Hero Member
Posts: 16462
Joined: Fri Mar 11, 2011 8:31 pm
Location: Vereeniging

Re: 6.5 CM - QL herlaai hulp

Post by tripodmvr » Wed Aug 14, 2019 11:03 am

RL 17 53K psi 2700vps node.
.22 Krico, Howa 223 Varminter, 243 AI Musgrave RSA, Ruger RPR 243, P14 - 7 x 64, BSA 303 Sporter, 375 H&H Musgrave, 30-06 Ruger No. 1A, Khan O/U 12br, Norinco O/U 12br

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Wed Aug 14, 2019 11:19 am

tripodmvr wrote:RL 17 53K psi 2700vps node.
Dit klink nogals lekker ne. Haha ai. Hoeveel kruit moet ek gooi. Sommer net vir reference asb Image

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Wed Aug 14, 2019 11:20 am

tripodmvr wrote:Ek sien Norma MRP kan dalk die wenner wees. Druk 53K psi met 2740vps as node.
Dalk vir hom ook. Hoeveel ek moet laai. Asb. Dankie!! Ek moet uit NZ die SA manne vra want ek weet julle manne verstaan.

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

tripodmvr
Hero Member
Hero Member
Posts: 16462
Joined: Fri Mar 11, 2011 8:31 pm
Location: Vereeniging

Re: 6.5 CM - QL herlaai hulp

Post by tripodmvr » Wed Aug 14, 2019 12:07 pm

Dankie vir die vertroue. Kyk na die twee skermskote vir inligting.

Begin laer en raadpleeg maar Alliant en Norma se herlaai inligting. Oor die algemeen brand die dryfmiddels vinniger as voorspel. Baie selde dat hulle stadiger is.

Stuur werklike geskiete inligting en ons kry die Creed op skoot.
Rem 6,5 Creed Norma MRP predicted node.jpg.png
Rem 6,5 Creed RL17 predicted node.jpg
You do not have the required permissions to view the files attached to this post.
.22 Krico, Howa 223 Varminter, 243 AI Musgrave RSA, Ruger RPR 243, P14 - 7 x 64, BSA 303 Sporter, 375 H&H Musgrave, 30-06 Ruger No. 1A, Khan O/U 12br, Norinco O/U 12br

Rem
Sr. Member
Sr. Member
Posts: 332
Joined: Wed Jun 01, 2016 1:07 pm
Location: Wellington (New Zealand)

Re: 6.5 CM - QL herlaai hulp

Post by Rem » Wed Aug 14, 2019 12:10 pm

tripodmvr wrote:Dankie vir die vertroue. Kyk na die twee skermskote vir inligting.

Begin laer en raadpleeg maar Alliant en Norma se herlaai inligting. Oor die algemeen brand die dryfmiddels vinniger as voorspel. Baie selde dat hulle stadiger is.

Stuur werklike geskiete inligting en ons kry die Creed op skoot.
Rem 6,5 Creed Norma MRP predicted node.jpg.png
Rem 6,5 Creed RL17 predicted node.jpg
Baie dankie, waardeer!

Sent from my SM-G960F using Tapatalk
Sako .243
Tikka 6.5Creedmoor
Krieger 300WSM
9mm Glock 19 Gen 4
--------------------------------------------------------------------------
A bullet is forever

Post Reply

Return to “Herlaai/Reloading”