JARACAL

Diesel Dog wrote: Wed Dec 22, 2021 7:24 pm I want to try the 250gr ATip in my 300 prc and need some guidance regarding max speed with N 570.
Included in the packaging is a airsickness bag just in case one can't stomach the price per shot.

DD

Sent from my SM-G980F using Tapatalk

DD,
Laat jou freebore toe vir die 250 A tips?

Kan net nie die rondte uitwerp sonder om die slot uit te haal nie.

Sent from my SM-G980F using Tapatalk

Dankie

230grAtips metRL26 ek sien nie druk tekens.Die Labradar het mooi gewerk as ek onthou het om hom te "arm".Het ook externe battery gebruik en al sy timeout verstellings op maximum gestel.Vanoggend het ons baan weer sy nukke gewys ,630m gong links en regs afgeskiet met 230gr punt .Kan mens dit nou oorvertel

DD

Sent from my SM-G980F using Tapatalk

Het jy toe reg gekom met n reamer?

Nee ek dink nie daai man antwoord vreemde nommers nie.As jy miskien voorbrand kan maak sal dit gaaf wees.

DD

Sent from my SM-G980F using Tapatalk

[quote="Diesel Dog" post_id=859355 time=1640876444 user_id=11453]
230grAtips metRL26 ek sien nie druk tekens.Die Labradar het mooi gewerk as ek onthou het om hom te "arm".Het ook externe battery gebruik en al sy timeout verstellings op maximum gestel.Vanoggend het ons baan weer sy nukke gewys ,630m gong links en regs afgeskiet met 230gr punt .Kan mens dit nou oorvertel

DD[IMG]//uploads.tapatalk-cdn.com/202112 ... 983175.jpg[/IMG]

Sent from my SM-G980F using Tapatalk
[/quote]

I wonder if Dale still follows this thread?

DD

I'm still here.

What does your crystal-ball say about the 230 bergers and the RL26?

DD

Give me all the data, I am too lazy to go back in the thread and look it up.

Cci250 24"loop
97.1gr dop vol
TPL 97,2MM
230 ATIP
LOAD AS PER PIC
//uploads.tapatalk-cdn.com/202112 ... 983175.jpg

Bullet code ?

'

I think you just broke my crystal ball.
It just went tilt.
It told me that you have 3.60mm of the bullet shank in the neck.
It told me that your burn rate is ridiculously high and it also told me that your pressure is at 72700 psi

I hope you can fix it a lot of people rely on its predictions. Serves you right for taking such a long holiday and leaving me on my own !

DD

I really have to question those velocities,
Realistically you should be running about 2750 fps with this combo,

Replace the bullet with 230 a tip

Don't have it in my database.
Please give me length of bullet.
Small diameter and length of boat tail.

44.89 mm length
5.7mm bt length
6.27mm base dia

Thanks.
What is your TPL with thee bullets ?

97.2mm
I GAVE THE INCORRECT BULLET INFO ABOVE:-[The data was collected with the Hornady bullets and not the Bergers.

DD

OK so with the A tip data you still over pressure and your burn rate is still high.
Clearly this cartridge falls into major overbore category and the long bearing surface of these bullets also doesn't help.
With your existing data, my crystal ball which is still smoking a little bit, tells me that you should be at +- 75.5 grains for 2788 fps and 61500 psi.

The positive part is that my crystal ball now says you have 7.55mm of the bullet shank in the neck.

I was getting 2835fps at 95 mm tpl with 230 bergers and 80.4gr n 560.
THIS THING IS ALL SHOW AND NO GO!!

DD

Give it to me as late Christmas present.