JARACAL

Posted: **Thu Mar 13, 2014 3:15 pm**

lekker lag ek nou vir daai kleintjie!

Posted: **Wed Mar 19, 2014 8:13 am**

Kyk sy vinger as hy die sneller trek so by 5min20

Posted: **Mon Mar 24, 2014 9:28 am**

http://youtu.be/ljyZuKnRSr8

Posted: **Mon Mar 24, 2014 9:49 am**

eINA, daai mos eina gewees het.

Posted: **Mon Mar 24, 2014 2:44 pm**

dom verby!?

Posted: **Tue Mar 25, 2014 3:47 pm**

http://www.sport24.co.za/Multimedia/Rug ... 20140325-2

Posted: **Fri Mar 28, 2014 8:47 am**

Posted: **Fri Mar 28, 2014 9:31 am**

Ek hou nie van rap nie, maar die een is goed!

Posted: **Fri Mar 28, 2014 9:32 am**

https://www.facebook.com/photo.php?v=10202206354105498

Hierdie man praat die waarheid van John Deere trekkers!

Posted: **Fri Mar 28, 2014 10:37 am**

Vir die ouens wat ietsie soek om te doen die naweek

Posted: **Fri Mar 28, 2014 2:32 pm**

Wonner hoe gaan die debat gaan as ons nou al so stry oor bakkie / watergat /Hide jag as daar hiermee begin gejag word.

https://www.youtube.com/embed/SNPJMk2fgJU

Posted: **Sat Mar 29, 2014 7:54 am**

boogman wrote:Wonner hoe gaan die debat gaan as ons nou al so stry oor bakkie / watergat /Hide jag as daar hiermee begin gejag word.

https://www.youtube.com/embed/SNPJMk2fgJU

Flippen mal rus daai!!

Posted: **Thu Apr 03, 2014 8:04 am**

So lekker lag een vir die Donderdag
https://www.youtube.com/watch?v=NrFljDnmBws

Posted: **Thu Apr 03, 2014 5:52 pm**

Frikkie, net weer 'n bewys dat niks onder 'n afdak groei nie

, maar die perd het "moves".
Daai is nie sy eerste klas nie

Posted: **Fri Apr 04, 2014 6:42 am**

Ja nee so waar Gawie, ek dink daai instrukteur was nie baie beindruk nie.

Posted: **Fri Apr 04, 2014 8:15 am**

Hopeloos te veel waarheid in die clip

Posted: **Fri Apr 04, 2014 8:16 am**

Posted: **Wed Apr 09, 2014 12:02 pm**

So ietsie net om dankie te sê vir ons pappa's.
https://www.youtube.com/watch?v=fsomUufIUJw

Mens sê nie altyd dankie vir ons pa nie en ja dan net daai dag dan kan mens nie meer iets sê nie

Posted: **Thu Apr 10, 2014 10:33 am**

Hierdie is beslis op 'n plaas geneem waar daar nie baie vermaak is nie!

http://www.youtube.com/watch?v=RY2oav3LL3w

Posted: **Thu Apr 10, 2014 10:35 am**

Oom Massie.
Hier is een vir Oom.

Free style, 1/4 scale, chevy V8
250 cc , Weight 17 Kg , Cylinder head length 200 mm
No rotational weight added to aid idle quality
Bore, Conrod length and Stroke based on chevy 308
Fully water cooled cylinder heads and piston sleeves
Scaled down starter motor with bendix and solenoid
Scaled down clutch assembly and flywheel
Oil pan (Sump) manufactured using 1mm sheet steel

Engine block machined from billet aluminum
Bore 36.5mm Stroke 30mm ( EN9 billet Crank shaft, Internal balanced)
270 degree sport camshafts
8.6 : 1 compression ratio
Idle RPM ~980 Max RPM 6000
20W 50 motor oil (Crank , Rods and Cams 4 bar pressure fed )
95 octane unleaded fuel
Modified diaphragm carburetor ( To achieve Holly look alike)
Optical triggered Electronic ignition
3D printed plastic distributer cap
All parts manually machined, no CNC used.
This was a 4 year project (Jan 2009 - Mar 2014)
Special thanks to Jan & Jurie Naude for cylinder head and intake manifold castings