Page 3 of 6
Re: Swaar diens bipod
Posted: Fri Dec 06, 2019 2:05 pm
by Diesel Dog
Pinkes die eerste een met 'carbon-fiber arms' weeg 1.2kg maar is nie rigid genoeg na my sin nie die tweede een weeg 1.65kg en is baie meer rigid .
DD
Re: Swaar diens bipod
Posted: Sat Dec 07, 2019 6:10 am
by Diesel Dog
Old school production.
DD
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Sat Dec 07, 2019 6:36 am
by Apie
Spoggerig!
Sent from my iPhone using Tapatalk
Re: Swaar diens bipod
Posted: Tue Dec 10, 2019 6:58 pm
by Diesel Dog
Nog een klaar met "low profile mount"
DD
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Tue Dec 10, 2019 8:34 pm
by jdpretorius
Dit is regtig mooi DD
Sent from my ANE-LX1 using Tapatalk
Re: Swaar diens bipod
Posted: Tue Dec 10, 2019 8:42 pm
by Malan123
Hoeveel kos hulle?
Baie netjies!!!
Re: Swaar diens bipod
Posted: Tue Dec 10, 2019 9:35 pm
by Diesel Dog
Ek wens ek kon dit meer koste doeltrefend vervaardig maar dit werk steeds duur uit teen R4950.00
DD
Re: Swaar diens bipod
Posted: Wed Dec 11, 2019 6:32 am
by jdpretorius
DD mooi presisie handgemaakte goed is duurder - punt. Oor die algemeen kan 'n ou se prys ook nie eers betaal vir die ure se werk wat daar in gaan nie en mens kan nie massa produksie China items daarmee vergelyk nie. Ek sien dit ook met die goeitjies waarmee ek vroetel en die koste van materiale
Kortom...moet nie skaam voel vir jou prys nie
Re: Swaar diens bipod
Posted: Wed Dec 11, 2019 9:23 am
by Capt. Yoda
Diesel Dog wrote: Tue Dec 10, 2019 9:35 pm
Ek wens ek kon dit meer koste doeltrefend vervaardig maar dit werk steeds duur uit teen R4950.00
DD
As n ding werk en van goeie gehalte is sal mense betaal vir dit.
Re: Swaar diens bipod
Posted: Tue Dec 17, 2019 9:25 am
by Diesel Dog
Wat should have been a fun project has turned into a mundane manufacturing process
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Tue Dec 17, 2019 9:35 am
by Diesel Dog
.
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Thu Dec 19, 2019 8:17 pm
by Diesel Dog
Nog een met satin finish.
DD
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Thu Dec 19, 2019 8:39 pm
by jankraay
Die bipod gaan lekker werk.
Sent from my iPhone using Tapatalk
Re: Swaar diens bipod
Posted: Fri Dec 20, 2019 2:27 pm
by Diesel Dog
Het nou al met verskilende Ruger Precision gewere die selfde probleem gekry, die M lok stelsel wat die piccatiny vas hou kom los en kan nie meer vas gedraai word nie "thread - bound".
Met die mod moet die voorlaai afbreek
DD
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Sun Dec 22, 2019 4:18 pm
by Diesel Dog
Dom vingers en klein parte. Die t nuts gemaak vir anshutz rail.
DD
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Sun Dec 22, 2019 6:41 pm
by Francoisv
Alles behalwe dom vingers.
2 daughters. Plenty guns.
Re: Swaar diens bipod
Posted: Thu Dec 26, 2019 4:22 pm
by Diesel Dog
Ek toets nog alternatiewe material vir die bene.
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Thu Dec 26, 2019 4:23 pm
by Diesel Dog
.
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Fri Dec 27, 2019 8:20 pm
by Diesel Dog
Wil nog in die jaar toets.
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Fri Dec 27, 2019 9:43 pm
by jdpretorius
Daai lyk of dit kan werk DD
Sent from my ANE-LX1 using Tapatalk
Re: Swaar diens bipod
Posted: Sat Dec 28, 2019 1:53 pm
by Diesel Dog
.
Sent from my SM-G950F using Tapatalk
Re: Swaar diens bipod
Posted: Thu Jan 16, 2020 10:07 pm
by Diesel Dog
Another project that I am contemplating for a adjustable rear bag.
DD
Sent from my SM-G950F using Tapatalk
Swaar diens bipod
Posted: Fri Jan 17, 2020 6:43 am
by BandK
Diesel Dog wrote:Another project that I am contemplating for a adjustable rear bag.
DD
Sent from my SM-G950F using Tapatalk
Hi DD,
Will it work if the adjustment knob is at the same angle as the the travel of the base, that way the knob does not also need to move up as you adjust taking away one friction point.
Hope I articulated what I wanted to ask.
[Edit: on second thought - will my idea/question/suggestion “tilt” the tray?]
Sent from my iPhone using Tapatalk
Re: Swaar diens bipod
Posted: Fri Jan 17, 2020 11:03 am
by Diesel Dog
[quote=BandK post_id=800387 time=1579236188 user_id=12187]
[quote="Diesel Dog"]Another project that I am contemplating for a adjustable rear bag.
DD [IMG]
//uploads.tapatalk-cdn.com/202001 ... 9f7b28.jpg[/IMG]
Sent from my SM-G950F using Tapatalk[/quote]
Hi DD,
Will it work if the adjustment knob is at the same angle as the the travel of the base, that way the knob does not also need to move up as you adjust taking away one friction point.
Hope I articulated what I wanted to ask.
[Edit: on second thought - will my idea/question/suggestion “tilt” the tray?]
Sent from my iPhone using Tapatalk
[/quote]
This design is a compromise to accommodate the ergonomic position in which the shooters hand will be in the prone position and to gain maximum clearance between the rifle-stock and the adjustment knob.
Your suggestion will improve the smoothness of the adjustment if the axial force is applied at the center of mass of the movable body .This was my initial idea but due to the complexity to satisfy the ergonomic criteria I quickly abandoned it in favor of a more simplistic solution.
DD
Re: Swaar diens bipod
Posted: Fri Jan 17, 2020 11:25 am
by Landcruiserman
Maak die agterste vaste punt 'n horisontale as wat kan swivel in terme van die bed wat beweeg…
m.a.w. die "horisontale as" is net 'n stuk round bar wat kan swivel met 'n skroefdraad gat deur waar jou verstellings skroef deur loop....
Jammer vir die Afrikaans en ek wens ek kan teken maar kyk maar of jy verstaan….
