Arrow weight tubes

[Ranger]

I’m looking arrow weight tubes. Either 3 or 5 gpi. To for the standard thicker arrows. Just like these…

https://www.3riversarchery.com/3rivers- ... id=1351180

[Thunderhead]

Hi I always struggled to find weight tube so found nylon compressor hoses worked well. Someone said they used dripper lines aswell.

[Ranger]

Thank you, I’ll look for your suggestions

[Lapua]

I used pneumatic air hose, the plastic/nylon type. It ads between 5 and 6grain per inch, depending on its wall thichness. I used to get it from Festo.

[Ranger]

I used pneumatic air hose, the plastic/nylon type. It ads between 5 and 6grain per inch, depending on its wall thichness. I used to get it from Festo.

Thank you, that weight sounds perfect.

[Ranger]

Is it something like this?

https://www.nylontubesandcoils.co.za/nylon12-nylonpa12

[Thunderhead]

Looks right. If it knocks your nock out on impact putting a kink or two stops that.

Is it something like this?

https://www.nylontubesandcoils.co.za/nylon12-nylonpa12