20 moa base

GVC86 · Post by **GVC86** » Sat Nov 07, 2015 8:59 pm

Hi guys,

Can anyone help me with dimensions for a 20 moa base for a rsa single shot action?

Thanks
George

Post by **tripodmvr** » Sat Nov 07, 2015 9:02 pm

How long does the base need to be? From there it is easy to calculate the height difference between the 2 end points if you are going to have it machined.

GVC86 · Post by **GVC86** » Sat Nov 07, 2015 9:06 pm

I have no idea.

Was hoping someone here could give me measurements of theirs then I could do the math.

Post by **tripodmvr** » Sat Nov 07, 2015 9:19 pm

0,58mm heighth difference per 100mm length.

GVC86 · Post by **GVC86** » Sat Nov 07, 2015 9:20 pm

Awesome thanks a million

NJ_v_N · Post by **NJ_v_N** » Sun Nov 08, 2015 9:55 am

GVC if you're looking at having one made Gerrie de Beer of Sudami made me one to the required inclination and holes spacing as per my receiver (all the RSA's differ as none had front holes). And it wasn't at all expensive compared to the commercial rails for other rifles.

GVC86 · Post by **GVC86** » Sun Nov 08, 2015 10:00 am

NJ_v_N wrote:GVC if you're looking at having one made Gerrie de Beer of Sudami made me one to the required inclination and holes spacing as per my receiver (all the RSA's differ as none had front holes). And it wasn't at all expensive compared to the commercial rails for other rifles.

Hi NJ,

Thanks for the info.

JARACAL

20 moa base

20 moa base

Re: 20 moa base

Re: 20 moa base

Re: 20 moa base

Re: 20 moa base

Re: 20 moa base

Re: 20 moa base