QL advies vir 243 Win Howa

[bsaaiman]

Hallo almal,

ek het onlangs die Howa 243 Bull Barrel gekry en moet nou aan ladings begin werk en sal regtig waardeer as iemand vir my lading kan kyk op QL

Kaliber: 243 Win
Koeel: Nosler Partition P/N 16315
Koeel gewig: 95grein
Maak Dop: Lapua
H2o dop: 53.5
Slagdop: Fiocchi Large Rifle
TPL: 66.3mm
Magasyn kas Lengte: nie n magasyn nie ( )
Loop Lengte: 24"
Kruit: S365 Lot 81

Spoed gemeet was met 41.5 grein S365

Spoed: 3024
Spoed: 3024
Spoed: 3017
Spoed: 3025
Spoed: 3028

Dink as ek op OBT werk is hy so bietjie vinnig op die oomblik? By voorbaat dankie.

Groete,

Bartho

[Dale SH]

Magnetospeed/labradar or "normal" chrony ?
Case trim length ?
Is this your fireformed H20 volume ?

[bsaaiman]

Hi Dale,

Thanks for the response.

Speed was measured with Magnetospeed.

Case length at the moment is 51.32

H2O volume specified was measured before load at FL = 53.5

I have remeasure fired cases and this now equates to H2O = 54.5

I do however full size every time.

[Dale SH]

Node is at 40.9 grains for 2985 fps MV on the magnetospeed.
51775 psi
Next node is not achievable within safe pressure

[bsaaiman]

Thanks for the effort Dale. It is really appreciated. I will load accordingly and give you feedback.

[bsaaiman]

Hi Dale,

Just some feedback. Loaded 40.9 S365 as per your recommendation and speed is spot on. I might just play with TPL as it is loaded relatively short but will see what TPL is as per Hendrik's Accurate Chain

1. 2980
2. 2987
3. 2977
4. 2990
5. 2984

Thanks again for taking time to respond.

Regards,
Bartho

[tripodmvr]

Hoe het die groep gelyk? Plaas foto as jy kan.